Optical Control of Cellular ATP Levels with a Photocaged Adenylate Kinase

We have developed a new tool for the optical control of cellular ATP concentrations with a photocaged adenylate kinase (Adk). The photocaged Adk is generated by substituting a catalytically essential lysine with a hydroxycoumarin-protected lysine through site-specific unnatural amino acid mutagenesis in both E. coli and mammalian cells. Caging of the critical lysine residue offers complete suppression of Adk's phosphotransferase activity and rapid restoration of its function both in vitro and in vivo upon optical stimulation. Light-activated Adk renders faster rescue of cell growth than chemically inducible expression of wild-type Adk in E. coli as well as rapid ATP depletion in mammalian cells. Thus, caging Adk provides a new tool for direct conditional perturbation of cellular ATP concentrations thereby enabling the investigation of ATP-coupled physiological events in temporally dynamic contexts.     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

甲基氯硅烷精馏流程的模拟与优化

采用Aspen plus软件对工业七塔精馏过程进行全流程建模与模拟，优化工艺参数，研究了新的精馏节能工艺。对一甲塔等7个精馏塔采用双因素水平的灵敏度分析，考察了塔釜采出率、回流比、进料位置和塔顶压力对产品浓度和热负荷的影响，确定一甲塔最优的工艺参数：塔釜摩尔采出率为0.92，摩尔回流比为130，塔顶压力为0.18 MPa，总理论板数为400，在210块理论板位置进料。在此基础上，针对高能耗的脱高塔/脱低塔，模拟研究了双效精馏新工艺，新工艺可节省39.70%的年总成本；针对一甲塔模拟研究了热泵精馏新工艺，新工艺可降低41.42%的年总成本。     

Flow Cytometry: From Experimental Design to Its Application in the Diagnosis and Monitoring of Respiratory Diseases

Recent advances in the field of flow cytometry (FCM) have highlighted the importance of incorporating it as a basic analysis tool in laboratories. FCM not only allows the identification of cell subpopulations by detecting the expression of molecules in the cell membrane or cytoplasm, but it can also quantify and identify soluble molecules. The proper functioning of the FCM requires six fundamental systems, from those related to the transport of events to the systems dedicated to the analysis of information. In this review, we have identified the main considerations that every FCM user must know for an optimal antibody panel design, the quality systems that must govern the FCM protocols to guarantee reproducible results in research or clinical laboratories. Finally, we have introduced the current evidence that highlights the relevance of FCM in the investigation and clinical diagnosis of respiratory diseases, establishing important advances in the basic and clinical study of diseases as old as Tuberculosis along with the recent proposals for the monitoring and classification of patients infected with the new SARS-CoV2 virus.     

数据驱动的机床等待过程节能方法研究

为了降低机床等待过程中的能耗，提出了一种实时数据驱动的机床等待时间预测与节能控制方法。首先，建立了射频识别驱动的生产进度评估方法，并以生产进度数据作为输入，构建了基于堆栈降噪自编码的机床等待时间预测模型；其次，依据预测的机床等待时间，提出了机床状态切换方法，以降低机床能耗；最后，通过一个电梯零部件制造车间的案例分析，表明该方法的预测误差仅为4.1%，同时将机床等待过程能耗降低了57%，实现了制造车间的节能减排。     

TLCD基础隔震框架结构的减振控制研究

为了避免和减轻由过大隔震层位移引起的损害,对基础隔震框架结构装设调频液柱阻尼器(tuned liquid column damper,简称TLCD)后混合系统的减振效果进行研究。建立了单层和多层混合控制系统在地震作用下的运动方程,采用TLCD-结构体系转化为调频质量阻尼器(tuned mass damper,简称TMD)-结构体系的等效方法,利用TMD参数优化公式,得到单个TLCD初始设计参数,并采用状态空间方程得到多个TLCD最优设计参数。通过对某8层基础隔震结构进行模拟,证明了该理论设计方法的合理性。该混合结构不仅可以减小隔震层位移和加速度,而且对上部结构位移和加速度反应都能更有效的控制。     

近距离煤层群采空区漏风规律及防控措施研究

贵州地区煤层赋存条件复杂,煤层间距小,相邻采空区存在漏风通道的问题。采用SF6示踪法及重点区域指标气体数据分析法,对发耳煤矿采空区漏风规律及其治理措施进行研究。分析结果表明,由于相邻密闭效果欠佳,导致31004开切眼联络巷及31004工作面回风巷密闭漏风严重。31004采空区漏风通道主要是31004开切眼联络巷密闭及10^#煤层开采过程中对上部7^#煤层采空区造成二次扰动形成的纵向漏风通道;漏风量为83 m^3/min,采空区风速约为0.17 m/s。对存在的煤自燃隐患采取了注水降温措施,CO体积分数显著下降至(5~9)×10^-6。为即将开采的50105、50107工作面的煤自燃防控提供了科学依据和管控措施方案。     

Design of an adaptive super-twisting decoupled terminal sliding mode control scheme for a class of fourth-order systems

This paper proposes an adaptive super-twisting decoupled terminal sliding mode control technique for a class of fourth-order systems. The adaptive-tuning law eliminates the requirement of the knowledge about the upper bounds of external perturbations. Using the proposed control procedure, the state variables of cart-pole system are converged to decoupled terminal sliding surfaces and their equilibrium points in the finite time. Moreover, via the super-twisting algorithm, the chattering phenomenon is avoided without affecting the control performance. The numerical results demonstrate the high stabilization accuracy and lower performance indices values of the suggested method over the other ones. The simulation results on the cart-pole system as well as experimental validations demonstrate that the proposed control technique exhibits a reasonable performance in comparison with the other methods.     

Event-triggered decentralized adaptive fault-tolerant control of uncertain interconnected nonlinear systems with actuator failures

This paper investigates the event-triggered decentralized adaptive tracking problem of a class of uncertain interconnected nonlinear systems with unexpected actuator failures. It is assumed that local control signals are transmitted to local actuators with time-varying faults whenever predefined conditions for triggering events are satisfied. Compared with the existing control-input-based event-triggering strategy for adaptive control of uncertain nonlinear systems, the aim of this paper is to propose a tracking-error-based event-triggering strategy in the decentralized adaptive fault-tolerant tracking framework. The proposed approach can relax drastic changes in control inputs caused by actuator faults in the existing triggering strategy. The stability of the proposed event-triggering control system is analyzed in the Lyapunov sense. Finally, simulation comparisons of the proposed and existing approaches are provided to show the effectiveness of the proposed theoretical result in the presence of actuator faults.     

Discrete-time setpoint-triggered reset integrator design with guaranteed performance and stability

According to Bode's gain-phase relationship, in linear time-invariant controllers, introducing an integral action to eliminate the steady-state error has an adverse effect of increased phase delay and overshoot, leading to performance deterioration. Moreover, increasing the bandwidth of the closed-loop system to enhance the low-frequency disturbance rejection invariably amplifies the sensitivity to high-frequency disturbances. Hence, the performance of the linear controllers is always limited due to these fundamental frequency- and time-domain limitations. Motivated by the desire to address the fundamental limitations of linear controllers and improve the time-varying closed-loop performance, we put forward a novel setpoint-triggered reset integrator strategy that varies the integrator cut-off frequency based on the setpoint information. Particularly, to tackle the time-varying disturbances and setpoint profiles, the proposed controller consists of a nominal linear controller and a variable-gain reset integrator. We show the global asymptotic stability of the proposed methodology using positive-real lemma along with the LaSalle's invariance principle and experimentally validate using measured frequency response function. Moreover, the efficacy of the proposed technique compared to that of the linear controller is experimentally demonstrated on a benchmark rotary servo system. Experimental results assessed using the tracking error and cumulative power spectral density substantiate that the proposed control strategy can not only improve the low-frequency disturbance rejection but also augment the high-frequency trajectory tracking performance.